Mini Ram Van L4-156 2.6L SOHC VIN G 2-bbl (1984)
FIGURE 2
4.
Remove and discard fuel pump inlet filters using caution so as not to damage pump inlet.
5.
Install new fuel pump filter on fuel pump inlet (Figure 2).
6.
Install new straight fuel hose on fuel pump plastic outlet tube, making sure hose has contact with tube shoulder. Install and crimp (Miller Tool
C-4124 or equivalent) new fuel hose clamp (the larger of the two in the kit).
7.
Slide new fuel hose clamp on fuel hose and install fuel hose (with pump attached) to gauge unit fuel tube. Be sure the pump and filter are correctly
oriented (Figure 2). Align fuel hose clamp and crimp (Miller Tool C-4124 or equivalent).
8.
Reconnect both black and red wires to fuel pump. Position plastic strap over red wire and attach (Figure 2).
This procedure applies to converting service kits for service gauge units to the updated service packages. Rework kit, PN 4075490, must be used.
1.
Remove and discard fuel hose clamp and fuel hose containing the 90~ bend from the gauge unit fuel tube.
2.
Slide new fuel hose clamp (the smaller of the two in the kit) on new straight fuel hose, and install fuel hose to gauge unit fuel tube. Align fuel hose
clamp and crimp (Miller Tool C-4124 or equivalent).
3.
The remainder of the parts supplied in the kit will not be used.
This procedure applies to converting service kits for service pump units to the updated service packages. Rework kit, FM 4075490, must be used.
1.
Remove and discard fuel hose clamp and fuel hose containing the 90~ bend from the fuel pump plastic outlet tube.
2.
Remove and discard fuel pump inlet filter, using caution so as not to damage pump inlet.
