Mini Ram Van L4-156 2.6L SOHC VIN G 2-bbl (1984)
FIGURE 1
8.
Connect hose assembly, PN 4307382, from the fuel reservoir outlet (on the bottom of the reservoir) to the pressure regulator inlet (bottom fitting)
(Figure 1). Route this hose over the coolant hose, under the ignition wires, over the AC liquid line (small), and under the AC suction line (large)
(Figure 1). Clamp with hose clamp, PN 6500650. Torque to 10 inch pounds.
NOTE:
ROTATE THE CLAMP ON THE COOLANT HOSE NEAR THE FUEL RESERVOIR SO THAT NO SHARP METAL
CORNERS WILL CONTACT THE FUEL HOSES RUNNING OVER THE CLAMP.
9.
Connect white stripe hose assembly, PN 4307383, from the pressure regulator outlet to the carburetor fuel inlet (Figure 1). Clamp with hose
clamp, PN 6500650. Torque to 10 inch pounds.
10.
Place the four fuel hoses listed below in clip, PN 4307242, starting with the hose closest to the attaching screw (Figure 1).
a.
Chassis fuel supply line to fuel filter inlet hose.
b.
Fuel vapor return hose from the fuel pump and reservoir to the chassis return line.
c.
Pressure regulator outlet to carburetor inlet hose.
d.
Fuel reservoir to pressure regulator inlet hose.
