Mini Ram Van L4-156 2.6L SOHC VIN G 2-bbl (1984)
FIGURE 11
21.
Install the new vacuum harness overlay provided in the kit. See Figure 11 for proper connections with existing and new parts. When all vacuum
connections have been made, place the VSV in the mounting bracket. This is done by simply "snapping" it into the bracket's two spring arms.
22.
If the vehicle is equipped with air conditioning, then use the vacuum "tee", PN 3671410, provided and "tee" into the throttle kicker vacuum line
located on the manifold vacuum tree. Gather vacuum hoses together near the manifold vacuum tree and secure with snap clip (Figure 11).
23.
Reinstall the coolant temperature sensor and temperature gauge sending unit.
