Mini Ram Van L4-156 2.6L SOHC VIN G 2-bbl (1984)
FIGURE 10
14.
Replace the fuel return hose with the convolute wrapped hose supplied. Tie wrap the hoses to the existing bracket located on the right front corner
of the rocker cover (Figure 10).
NOTE:
THE FUEL RETURN HOSE DOES NOT GET REPLACED ON VEHICLES THAT HAVE FUEL FOAMING AND/OR VAPOR
LOCK KITS ALREADY INSTALLED (TECHNICAL SERVICE BULLETINS #18-05-85 REV A AND 18-18-85 REV A.)
Reinstall the distributor in the engine and replace the cap and wires. Connect the vacuum line which was removed from the original vacuum
advance unit to the vacuum nipple nearest to the distributor housing. The remaining nipple on the vacuum advance assembly (outermost nipple)
will be connected to the new vacuum harness overlay provided in the kit.
