Minivan Purge Solenoid: Emission Test High CO Reading
FIGURE 2
4.
Locate the vacuum tee under the carburetor. Route the remaining vacuum hose from the vacuum reducer (in the overlay harness) to the vacuum tee
and tie wrap it to the existing harness. For vehicles with air conditioning, use the supplied vacuum tee, PN 3671410, to tee into the vacuum line
which comes from the bottom of the vacuum tee. For vehicles without air conditioning, remove the rubber cap from the nipple of the bottom of the
vacuum tee and connect the 28" vacuum hose from the vacuum reducer (in the overlay harness) from Step 3 (Figure 2).
