Mini Ram Van L4-156 2.6L VIN G 2-bbl (1985)
Door Lock Switch: Testing and Inspection
Switch Voltage Test
Door Lock Switch Connectors
NOTE: The following test determines whether voltage is continuous through the wiring harness to the power door lock switch.
1.
Remove the door lock switch from the door trim panel.
2.
Separate the multiple terminal block on the wiring harness from the door lock switch.
3.
Connect one lead of a test light to the black wire terminal and the other lead to the red wire terminal. If the test light illuminates, the wiring circuit
between the battery and switch is functioning properly. If the test light does not illuminate, check the 30 amp main fuse (circuit breaker) or check
for an open in the wiring harness.
4.
If the wiring circuit is functioning properly, See: Body and Frame/Locks/Power Locks/Power Door Lock Motor/Testing and Inspection
