Mirada L6-225 3.7L VIN G 1-bbl (1982)
Fuel Tank: Service and Repair
Fuel Tank Assembly
Removal
1. Disconnect battery ground cable.
2. Remove fuel tank filler cap before disconnecting any lines. The tank could be under a small pressure.
Portable Holding Tank
3. Pump all fuel from fuel tank into an approved portable holding tank as shown or equivalent. If this equipment is not available, disconnect fuel line
from the inlet side of the fuel pump and connect a siphon hose to it. Drain fuel tank dry into a properly identified "Gasoline" safety container.
4. Remove screws that hold filler tube to body panel or housing.
5. Raise car on hoist.
