Monaco V6-182 3.0L SOHC (1990)
5. Remove spark plug wire retainer from top of thermostat housing.
6. Remove front damper mounting bracket nuts. Push bracket towards radiator but do not contact radiator fins.
7. Position accessory drive belt away from water pump.
8. Remove radiator upper and lower hoses from water pump.
Fig. 3 Radiator Hoses And Coolant Temperature Sensor - Early
9. Disconnect coolant temperature sensor wire connector from harness.
Fig. 4 Cylinder Head And Y-tube Hoses
10. Loosen clamps secure cylinder head to water pump hoses at cylinder heads. Do not remove the hoses at this time.
11. Loosen clamps securing heater hoses and Y-tube connecting hose at rear of water pump.