Monaco V6-182 3.0L SOHC (1990)
Fig. 4 Alternator Pivot Bolt, Lock Bolt And Adjusting Bolt 3.0L Engine
Fig. 5 Engine Damper Mounting Bracket 3.0L Engine
NOTE: Correct accessory drive belt tension is required to ensure optimum performance of the belt driven engine accessories. There are different
gauges for checking serpentine and V type belts. use belt tension gauge, number 7198, or an equivalent gauge, when checking belt tension. Place
gauge in the middle of the section of belt being used to check tension. For correct gauge measurement, the gauge must not contact any component
other than the drive belt. With the gauge fully seated on the belt, release the gauge handle as rapidly as possible to ensure a correct tension reading.
Fig. 2 Engine Without A/C