Monaco V6-182 3.0L SOHC (1990)
Fig. 2 Installing Lower Adapter Plates
2. Place lower adapter plates (G) into lower plate.
3. Place smaller adapter plates (F) around lower part of strut assembly and properly seat into lower plate that is secured in the vise.
Fig. 3 Installing Top Adapter Plate
4. Install top adapter plate (H), onto strut assembly and rotate strut to align with holes on plate. Install three 5/16 inch by 1.5 inch bolts (L & K) in
length through top plate and tighten to cushion (Q).
5. Threading rods into mounts, slowly compress coil spring to approximately 13/32 inch.
6. Relieve spring tension evenly by loosening threaded bolts and remove spring.
