Neon L4-2.0L DOHC (1996)
License Plate Lamp: Description and Operation
Tail Lamps and Rear License Plate Lamp
CIRCUIT OPERATION
Circuit A3 in the Power Distribution Center (PDC) connects to a bus bar in the fuse block. One of the four circuits powered by the bus bar is
circuit F33. A 40 Amp fuse in the PDC protects the A3 circuit. A 15 Amp fuse, in cavity number 2 of the fuse block, protects the F33 circuit.
The headlamp switch has 3 positions, ON, PARK (tail lamps) and OFF, plus a dimmer switch. Then the headlamp switch is in the PARK or ON
position, it connects circuit F33 to circuit L7. From the headlamp switch, circuit L7 branches to power the front parking lamps, rear tail lamps, side
marker lamps, and rear license plate lamp.
