Neon L4-2.0L DOHC (1996)
Camshaft Position Sensor: Service and Repair
Camshaft Sensor Replacement
Fig. 8 Camshaft Position Sensor Location
Fig. 9 Target Magnet Removal/Installation
NOTE: The camshaft position sensor is mounted to the rear of the cylinder head (Fig. 8).
REMOVAL
1. Remove filtered air tube from the throttle body and air cleaner housing.
2. Disconnect electrical connector from camshaft position sensor.
3. Remove camshaft position sensor mounting screws. Remove sensor.
Fig.35 Target Magnet Removal/Installation
4. Loosen screw attaching target magnet to rear of camshaft (Fig. 35).