Neon L4-2.0L DOHC (1996)
Fig 14 ACM Connectors
13. Disconnect ACM 4-way and 13-way connectors.
14. Remove Airbag Control Module.
INSTALLATION
1. Connect both ACM connectors and ensure both connectors and all locking tabs are engaged.
CAUTION: USE SUPPLIED SCREWS ONLY.
2. Position ACM (arrow pointing forward) in the console floor bracket, attach the nuts and tighten to 11 to 14 Nm (105 to 125 in lb) torque.
NOTE: The park brake lever can be in any position when releasing the auto adjuster. To ease installation of center console, it is advisable to pull
park brake lever handle all the way up before removing lockout pin.
3. Place park brake lever on console bracket.
-
Install and securely tighten the 2 attaching nuts.
Fig 15 Park Brake Cables Properly Installed In Equalizer
