Neon L4-2.0L DOHC (1996)
Headlamp Switch: Description and Operation
Headlamp Switch In ON Position
CIRCUIT OPERATION
When the headlamp switch is in the ON position, it connects the A3 circuit from the PDC to circuit L2. Circuit L2 connects to the multi-function
switch and feeds the L4 circuit (for low beam operation). The L4 circuit connects to a bus bar in the fuse block. Circuits L43 and L44 connect to
the bus bar in fuse block and power the low beam headlamps. Circuit L43 supplies voltage to the left headlamp. Circuit L44 supplies voltage to the
right headlamp. Both the L43 and L44 circuits have separate 10 Amp fuses located in fuse block. Fuse 17 protects circuit L43, and fuse 18
protects circuit L44.
When the operator selects high beam operation with the turn signal stalk of the multi-function switch, circuit L2 connects to the L3 circuit, Circuit
L3 powers high beam operation.