dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Headliner|Service and Repair|Page 9112 > < Air Bag Disarming|Page 9108
Page 1
background image

Headliner: Service and Repair

REMOVAL

1. Remove screws holding sun visor to roof header panel.
2. Disengage wire connector from lighted vanity mirror, if so equipped.
3. Separate sun visors from vehicle.
4. Remove A-pillar trim covers.
5. Remove B-pillar trim panels, if vehicle is a 4 door.
6. Remove (upper) quarter panel trim panels.
7. Remove assist handles, if so equipped.
8. Remove sun visor hooks.
9. Remove coat hooks, if vehicle is a 4 door.

10. If vehicle is equipped with a sunroof;

a. Open sunroof.

Sunroof Opening Trim Welt

b. Remove trim welt around sunroof opening.
c. Remove sunroof switch pod.
d. Disconnect sunroof switch pod wire connectors.
e. Remove screw holding switch pod retainer to roof.

11. Remove push-in fastener at rear of headlining.
12. Disengage dome lamp wire connector, at rear of headlining.
13. Remove push-in fastener holding wiring to C-pillar.

Headlining

14. Remove headlining through door opening.

INSTALLATION

1. Position headlining in vehicle.
2. Install sun visor hooks.
3. Install coat hooks, if vehicle is a 4 door.
4. Install push-in fastener at rear of headlining.
5. install assist handles, if so equipped.
6. Install push-in fastener holding headliner wiring to C-pillar.

Headliner|Service and Repair|Page 9112 > < Air Bag Disarming|Page 9108