Neon L4-2.0L SOHC (1995)
2.
Heat the effected area for approximately 2 to 4 minutes. The amount of time is dependent upon the size and shape of the affected area and the
severity of the condition.
NOTE:
CIRCULATE THE HEAT GUN AROUND THE EFFECTED AREA. DO NOT ALLOW HEAT TO BE DIRECTED AT ONE AREA FOR TOO
LONG, PAINT DAMAGE MAY OCCUR.
3.
If this Repair Procedure does not correct the condition, color-coat paint repair will be required.
NOTE:
IF PAINT "FOGGING" DAMAGE WAS CAUSED BY A FRONT END COVER OR A MAGNETIC SIGN, THE OWNER SHOULD BE
CAUTIONED AGAINST USING THAT PRODUCT, OR A SIMILAR PRODUCT THAT MAY CREATE THE PAINT "FOGGING".**
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-60-02-90
0.3 Hrs.
FAILURE CODE: XX - Service Adjustment
Technical Service Bulletin # 130194
Date: 940527
Bumper Fascia - White/Stained Appearance
NO: 13-01-94
GROUP: Frame & Bumpers
DATE: May 27, 1994
SUBJECT:
White Fascia Appearance
MODELS:
1995 (PL) Neon
NOTE:
THIS BULLETIN APPLIES TO WHITE HIGHLINE VEHICLES IDENTIFIED WITH A 4 IN THE SIXTH DIGIT OF THE VIN NUMBER,
BUILT PRIOR TO APRIL 22, 1994, (MDH 04-22-XX), EQUIPPED WITH WHITE GRAINED BUMPER FASCIAS.
SYMPTOM/CONDITION:
White front and/or rear bumper fascia is permanently stained or discolored by road film. Attempts to clean with detergents or chemicals are not effective.
DIAGNOSIS: