Neon L4-2.0L SOHC (1995)
Radiator: Service and Repair
1. Disconnect battery ground cable.
2. Drain cooling system, then remove hose clamps from radiator.
3. Disconnect automatic transaxle hoses from cooler and plug off.
4. Remove radiator to battery strut, then fan module assembly by disconnecting fan motor electrical connector.
5. Remove fan shroud retaining screws located on top of shroud.
6. Lift shroud up and out of bottom shroud attachment clips separating shroud from radiator.
7. On models equipped with dual cooling fans, the left fan module may be removed first, then the right side module.
8. On all models, remove upper radiator isolator bracket mounting screws, then the engine block heater, if equipped.
9. Remove air conditioning condenser attaching screws located at front of radiator, if equipped. Do not discharge air conditioning system.
10. Remove radiator from engine compartment by lifting upward.
11. Reverse procedure to install.
