dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Mount - Clicking Noise When Shifting|Page 2041 > < Engine - Excessive Perceived Movement|Page 2036
Page 1
background image

Engine Mount: All Technical Service Bulletins
Engine Mount - Clicking Noise When Shifting

NO: 09-12-94

GROUP: Engine

DATE: Jul. 8, 1994

SUBJECT:
Right Engine Mount Click Noise

MODELS:

1995 (PL) Neon

NOTE:

THIS BULLETIN APPLIES TO VEHICLES BUILT BEFORE APRIL 30, 1994 (MDH 04-30-XX)

SYMPTOM/CONDITION:

Click sound coming from the right side of the engine compartment during garage shift maneuvers and/or engine torque changes during low road speed
operation.

DIAGNOSIS:

To verify the condition:

1.

Start the vehicle, set the parking brake, and apply the service brakes.

2.

Operate the transmission shifter through a series of Reverse - Drive shifts and listen for the noise.

3.

If the noise is evident, place a screwdriver or similar device between the outer bracket and the isolator shell (see Figure 1).

4.

Again operate the transmission shifter through a series of Reverse - Drive shifts and listen for the noise.

5.

If the noise is gone, proceed with the repair.

6.

If the noise is still present, follow the Engine Diagnosis - Mechanical listed in the service manual and repair as required.

PARTS REQUIRED:

1

4668432

Support Assembly - Engine Mounting - Rt.

REPAIR PROCEDURE:

This bulletin involves replacing the right engine mount bracket.

1.

Remove the purge duty solenoid from the engine.

Engine Mount - Clicking Noise When Shifting|Page 2041 > < Engine - Excessive Perceived Movement|Page 2036