Neon L4-2.0L SOHC (1995)
Fig. 3 Fresh Air Duct To Throttle Body Assembly
5. Remove fresh air duct and upper air filter housing (Fig. 3)
6. Remove accelerator, kickdown and speed control cables from throttle lever and bracket.
Fig. 4 Idle Air Control (IAC) Motor And Throttle Position Sensor (TPS) Wiring Connectors And Vacuum Hose Connection.
7. Disconnect Idle Air Control (IAC) motor and throttle position sensor (TPS) wiring connectors (Fig. 4).
8. Disconnect vacuum hoses from throttle body (Fig. 4).
Fig. 5 Intake Manifold Electrical, Vacuum Hose Connections And Knock Sensor Electrical Connector
9. Disconnect Manifold Absolute Pressure (MAP), and intake air temperature electrical connectors. Disconnect vapor and brake booster hoses (Fig.
5).
10. Disconnect knock sensor electrical connector and disconnect wiring harness from tab located on the intake manifold (Fig. 5).
11. Disconnect electrical connector from starter relay.
12. Remove transmission to throttle body support bracket fasteners at the throttle body and loosen fastener at transmission end.
13. Remove throttle body.
