Neon L4-2.0L SOHC (1995)
1. Install new seal by using Tool 6780.
2. Place seal into opening with seal spring towards the inside of engine. Install seal until flush with cover.
3. Install crankshaft sprocket using Special Tool 6792.
4. Install timing belt and timing belt covers. Refer to Timing System Section for timing belt covers and belt.
5. Install crankshaft damper. Use thrust bearing/washer and 12M-1.75 x 150 mm bolt from Special Tool Kit 6792. Install crankshaft damper bolt and
tighten to 142 Nm (105 ft. lbs.)
