Neon L4-2.0L SOHC (1995)
6. Install camshaft sprocket retaining bolt. Hold camshaft sprocket with Special Tool C-4687-1 (shown in image above) and tighten bolt to 115 Nm
(85 ft. lbs.).
CAMSHAFT AND CRANKSHAFT TIMING PROCEDURE
TIMING BELT TENSIONER / TIMING BELT INSTALLATION
1. When tensioner is removed from the engine it is necessary to compress the plunger into the tensioner body.
2. Place the tensioner into a vise equipped with soft jaws and slowly compress the plunger.
CAUTION: Index the tensioner in the vise the same way it is installed on the engine. This is to ensure proper pin orientation when tensioner is installed
on the engine.
3. When plunger is compressed into the tensioner body install a 1.9 mm (5/64) allen wrench or pin through the body and plunger to retain plunger in
place until tensioner is installed.