Neon L4-2.0L SOHC (1995)
Powertrain Control Module: Service and Repair
Fig. 21 Powertrain Control Module
NOTE: The PCM attaches to the inner fender panel next to the washer fluid bottle on the driver side (Fig. 21).
REMOVAL
1. Disconnect negative cable from battery
2. Remove screws attaching PCM to body
3. Lift PCM up. Disconnect PCM 60-way connector.
4. Remove PCM.
INSTALLATION
1. Attach 60-way connector to PCM. Tighten 60-way connector screw to 4.5 Nm (40 in lb) torque.
2. Install PCM. Tighten mounting screws to 9 Nm (80 in lb) torque.
3. Connect negative cable to battery
