Neon L4-2.0L SOHC (1995)
3. Push the quick-connect fitting over the fuel tube until the retainer seats and a click is heard.
-
The quick-connect fitting has windows in the sides of the casing. When the fitting completely attaches to the fuel tube, the retainer locking ears
and the fuel tube shoulder are visible in the windows.
-
If they are not visible, the retainer was not properly installed (Fig. 21).
-
Do not rely upon the audible click to confirm a secure connection.
4. Ensure the locking ears on the retainer and the shoulder (stop bead) on the fuel tube are completely visible in the quick-connect fitting windows.
Do not rely upon the audible click to confirm a secure connection. Always pull on the line and fitting to ensure that retainer is seated.
5. Verify the connection by pulling on the lines. If the fitting locks in place, the connection is secure.
CAUTION: When using the ASD Fuel System Test, the Auto Shutdown (ASD) Relay remains energized for either 7 minutes, until the test is
stopped, or until the ignition switch is turned to the Off position.
6. Use the DRB or equivalent scan tool ASD Fuel System Test to pressurize the fuel system. Check for leaks.
