Neon L4-2.0L SOHC (1995)
10.
Disconnect fuel vapor tube from rear hose and allow rear end of tube to drop.
11.
Remove bolt retaining fuel filter and lower fuel filter.
12.
Disconnect fuel tank sending unit wiring connector.
13.
Position transmission jack under fuel tank and remove fuel tank support strap bolts (Figure 4).
Caution:
It is not necessary to drain the fuel tank. However, make sure that jack-to-tank contact surface is adequate and that jack is properly positioned.
14.
Slowly lower fuel tank about 2 inches and move tank rearward about two inches (Figure 4).
Caution:
DO NOT lower or move the tank rearward more than two inches or damage to fuel system components or sheet metal at fuel filler tube may
occur.
15.
Disconnect rear brake tubes from all under body plastic clips.
Note:
Leave clips attached to body. Clips may break if removal is attempted.
16.
Disconnect left and right rear brake tubes from the brake hoses at the rear frame rails. Remove and discard the corroded brake tube(s) (Figure 5).
Note:
To ease tube removal, the left tube should first be moved inboard of fuel supply and vapor tubes, then lowered.
17.
If fuel vapor tube requires replacement, disconnect tube from front vapor hose. Remove and discard corroded vapor tube.
18.
If fuel supply tube requires replacement, disconnect tube from fuel filter quick-connect. Remove and discard corroded supply tube.
