Neon L4-2.0L SOHC (1995)
Power Steering Pump: Service and Repair
Power Steering Pump Removal and Installation
1. Disconnect battery ground cable, then the power steering pressure hose from power steering pump.
2. Remove power steering fluid supply hose to power steering suction fitting, then the power steering fluid supply hose.
3. Remove two power steering pump to cast bracket mounting and adjusting bolts.
4. Loosen bolt attaching front power steering pump mounting bracket to front engine mount only far enough to slide bracket from behind bolt.
5. Remove drive belt, then the power steering pump and bracket as an assembly.
6. Reverse procedure to install.
