Neon L4-2.0L SOHC (1995)
Spindle: Service and Repair
With Rear Drum Brakes
1. Remove rear hub and bearing as outlined under Transmission and Drivetrain/ Drive Axles, Bearings and Joints/ Rear Hub & Bearing
Replacement.
ABS Speed Sensor Location. Rear Drum Brakes
ABS Speed Sensor Location. Rear Disc Brakes
2. On models equipped with ABS, remove the retaining bolt, then the speed sensor. If speed sensor is seized, do not use pliers to remove. Gently
tap on mounting ear with a suitable punch and hammer to loosen sensor.
3. Remove brake support plate mounting bolts, then without disconnecting brake fluid hose, position and support assembly aside. Do not allow
assembly to hang from the brake fluid hose.
4. Loosen but do not remove spindle knuckle to strut clevis nuts. The spindle knuckle to strut clevis bolts are serrated for a tight fit into the knuckle.
Do not turn bolt when loosening. Turn nut only, or damage to knuckle or bolt will occur.
Tension Strut Removal
