Neon L4-2.0L SOHC (1995)
8. Remove braking disc from front hub.
9. Remove nut attaching outer tie rod end to steering knuckle. Nut is to be removed from tie rod end using the following procedure: Hold tie rod end
stud with a 11/32 socket while loosening and removing nut.
10. Remove the tie rod end stud from steering knuckle arm using Special Tool MB-990630, or equivalent.
11. Remove nut and bolt retaining ball joint stud into steering knuckle.
NOTE: Use caution when separating ball joint stud from steering knuckle, so ball joint seal does not get damaged.