Neon L4-2.0L VIN C (1998)
Rear Door Exterior Handle: Service and Repair
EXTERIOR HANDLE
REMOVAL
1. Remove door trim panel.
2. Close door glass.
3. Disengage clips attaching linkage rods to door handle.
Fig. 4
4. Remove nuts attaching outside handle to door (Fig. 4).
5. Remove outside handle.
INSTALLATION
1. Position door outside handle in opening.
2. Tighten attaching nuts.
3. Connect linkage rods to latch.
4. Connect lock and latch rods to door handle.
5. Install door trim panel.