Neon L4-2.0L VIN C (1998)
Brake Proportioning Valve Applications And Pressure Specifications
7. With the aid of a helper, apply pressure to the brake pedal until reading on proportioning valve inlet gauge, is at the pressure shown on the
following chart. Then check the pressure reading on the proportioning valve outlet gauge. If proportioning valve outlet pressure does not agree
with value shown on the following chart, when inlet pressure shown on chart is obtained, replace the proportioning valve. If proportioning valve is
within pressure specifications do not replace proportioning valve.
8. Check rear wheel brake shoe linings for contamination or for replacement brake shoes not meeting OEM brake lining material specifications.
These conditions can also be a possible cause for a premature rear wheel skid.
9. Install proportioning valve in chassis brake tube. Tighten the proportioning valve to a torque of 17 Nm (145 inch lbs.).
10. Bleed the affected brake line.
