Neon L4-2.0L VIN C (1998)
CAUTION: Be sure old vacuum seal is removed from power brake vacuum booster before attempting to install master cylinder and NEW
vacuum seal.
13. Position master cylinder on studs of vacuum booster aligning push rod on vacuum booster with master cylinder push rod.
Master Cylinder Mounting
14. Install the 2 master cylinder to power brake unit mounting nuts. Tighten the mounting nuts to a torque of 28 Nm (250 inch lbs.) torque.
ICU Mounting Location
15. Connect brake tubes to master cylinder primary and secondary ports. Torque all tube nuts to 17 Nm (145 inch lbs.) torque.
Torquing Brake Tube Nuts At Master Cylinder