Neon L4-2.0L VIN C (1998)
WARNING: When repairs to the park brake hand lever assembly or cables is required, the auto adjuster must be reloaded and locked
out.
5. Lower park brake lever handle.
Locking Pin Installed In Park Brake Lever
6. Grasp park lever output cable by hand and pull rearward. Continue pulling on cable until a 3/16 inch drill bit can be inserted into handle and sector
gear of park brake mechanism. This will lock the park brake mechanism and take tension off park brake cables.
Park Brake Cables At Equalizer
7. Remove rear park brake cables from the park brake cable equalizer.
8. Remove rear seat cushion from vehicle.
Rear Door Sill Scuff Plates
