Neon L4-2.0L VIN C (1998)
Parking Brake Lever: Service and Repair
Parking Brake Lever Replacement
WARNING: The auto adjusting feature of this parking brake lever assembly contains a clock spring loaded to approximately 20 pounds. Do
not release the auto adjuster lockout device before installing cables into the equalizer. Keep hands out of auto adjuster sector and pawl area.
Failure to observe caution in handling this mechanism could lead to serious injury.
REMOVE
Attaching Screws At Rear Of Center Console With Out Arm Rest
Attaching Screws At Rear Of Center Console With Arm Rest
1. Remove the screws attaching the rear of the center console assembly to console bracket.
Attaching Screws At Front Of Center Console
2. Remove the 2 screws located in cup holders, attaching front of center console assembly to console bracket.
3. Raise park brake hand lever as high as it will go to get the required clearance to remove the center console.
