Neon L4-2.0L VIN C (1998)
Pressing Hub Out Of Wheel Bearing
8. Position Driver, Special Tool 6644-2 or equivalent on the small end of the hub. Using arbor press, remove hub from wheel bearing. The outer
bearing race will come out of the wheel bearing when the hub is pressed out of the bearing.
9. Remove Bearing Splitter, Special Tool 1130 or equivalent from steering knuckle.
Wheel Bearing Retainer Plate
10. Remove the 3 bolts mounting the bearing retainer plate to the steering knuckle. Remove the bearing retainer plate from the steering knuckle.
11. Place steering knuckle in an arbor press supported by press blocks as shown. Press blocks must not obstruct bore in steering knuckle so wheel
bearing can be pressed out of the steering knuckle. Place Bearing Driver, Special Tool MB-990799 or equivalent on outer race of wheel bearing.
Press wheel bearing out of the steering knuckle.
