Neon L4-2.0L VIN C (1998)
Wheel Cover: Description and Operation
A lock-on type wheel cover is used on certain models.
The wheel cover is locked to the wheel using the 5 nuts located in the wheel cover. The nuts in the wheel cover, thread onto a special externally threaded
wheel nut. This is the method used to retain the wheel cover to the wheel.
The wheel cover retaining nut is retained in the wheel cover and will stay on the wheel cover when unthreaded from the wheel nut. If required, the
retaining nut for the lock-on wheel cover can be removed from the wheel cover and replaced as a separate part of the lock-on wheel cover.
The lock-on wheel cover can not be removed from the wheel until all 5 of wheel cover retaining nuts are unthreaded from the wheel nuts. Then the
lock-on wheel cover can be removed by hand from the wheel.
