Neon L4-2.0L VIN C (1998)
Ignition Coil: Description and Operation
Fig.3 Ignition Coil Pack
WARNING: The direct ignition system generates approximately 40,000 volts. Personal injury could result from contact with this system.
OPERATION
The coil pack consists of 2 coils molded together The coil pack is mounted on the valve cover (Fig. 3). High tension leads route to each cylinder
from the coil. The coil fires two spark plugs every power stroke. One plug is the cylinder under compression, the other cylinder fires on the
exhaust stroke. Coil number one fires cylinder 1 and 4. Coil number two fires cylinders 2 and 3. The PCM determines which of the coils to charge
and fire at the correct time.
Fig.5 Power Distribution Center (PDC)
The Auto Shutdown (ASD) relay provides battery voltage to the ignition coil. The PCM provides a ground contact (circuit) for energizing the coil.
When the PCM breaks the contact, the energy in the coil primary transfers to the secondary causing the spark. The PCM will de-energize the ASD
relay if it does not receive the crankshaft position sensor and camshaft position sensor inputs.
