Neon L4-2.0L VIN C (1998)
Airbag Control Module
12. Remove module mounting nuts and remove module.
ACM Connector
13. Disconnect ACM 23-PIN connector.
14. Remove Airbag Control Module.
INSTALLATION
1. Connect ACM connector and ensure that the connector locking tab is engaged.
CAUTION: USE SUPPLIED SCREWS ONLY
2. Position ACM (arrow pointing forward) in the console floor bracket, attach the nuts and tighten to 11 to 14 N.m (105 to 125 in. lbs.) torque.
NOTE: The park brake lever can be in any position when releasing the auto adjuster. To ease installation of center console, it is advisable to pull
park brake lever handle all the way up before removing lockout pin.
3. Place park brake lever on console bracket. Install and securely tighten the 2 attaching nuts.