Neon L4-2.0L VIN C (1998)
Backup Lamp Switch: Service and Repair
Manual Transmission
Back-up Lamp Switch
NOTE: The back-up lamp switch is located on the top left front side of the transaxle case.
REMOVAL
1. Lift vehicle on hoist.
2. From bottom side of vehicle, remove wiring connector from switch.
3. Unscrew switch from transaxle.
INSTALLATION
1. To install, reverse removal procedure. Teflon tape or equivalent must be used on switch threads.
CAUTION: Do not overtighten switch.
2. Confirm back-up lamps are functioning properly following installation.
