Neon L4-2.0L VIN C (1998)
7. Fill power steering pump fluid reservoir to the proper level.
8. Start the engine and let run for a few seconds. Then turn the engine off.
9. Add fluid if necessary. Repeat the above procedure until the fluid level remains constant after running the engine.
10. Raise front wheels of vehicle off the ground.
11. Start the engine. Slowly turn the steering wheel right and left, lightly contacting the wheel stops. Then turn the engine off.
12. Add power steering fluid if necessary.
13. Lower the vehicle and turn the steering wheel slowly from lock to lock.
14. Stop the engine. Check the fluid level and refill as required.
15. If the fluid is extremely foamy, allow the vehicle to stand a few minutes and repeat the above procedure.
