Neon L4-2.0L VIN C (1998)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley Replacement
NOTE: The power steering pump must be removed from the vehicle for removal of the power steering pump pulley.
REMOVE
1. Remove power steering pump from engine.
CAUTION: Do not hammer on power steering pump pulley or shaft to remove power steering pump pulley. This will damage the pulley and the
power steering pump.
2. Mount power steering pump in a vise using the power steering pump mounting bracket. Install Puller, Special Tool C-4333 or C-4068, or
equivalents on power steering pump pulley. Remove the power steering pump pulley from the power steering pump shaft.
3. Replace power steering pump pulley if bent, cracked, or loose.
CAUTION: Do not hammer on power steering pump pulley or shaft to remove power steering pump pulley. This will damage the pulley and the power
steering pump.
INSTALL
1. Mount power steering pump in a vise using the power steering pump mounting bracket. Then place power steering pump pulley squarely on end of
power steering pump shaft. Mount Installer, Special Tool C-4063, or equivalent in internal threads of the power steering pump shaft and against
power steering pump pulley.
