Neon L4-2.0L VIN C (1998)
2. Place power steering pump pulley squarely on end of power steering pump shaft. Mount Installer, Special Tool C-4063 in internal threads of the
power steering pump shaft and against power steering pump pulley.
3. Ensuring that special tool and pulley remain aligned with pump shaft, force pulley onto power steering pump shaft until flush with the end of the
shaft. When pulley is flush with shaft tool will no longer be able to be turned.
4. Remove Installer, Special Tool C-4063 from power steering pump.
5. Install power steering pump and bracket assembly back on engine.
Power Steering Pump Pulley Replacement
NOTE: The power steering pump must be removed from the vehicle for removal of the power steering pump pulley.
REMOVE
1. Remove power steering pump from engine.
CAUTION: Do not hammer on power steering pump pulley or shaft to remove power steering pump pulley. This will damage the pulley and the
power steering pump.
