Neon L4-2.0L VIN C (1998)
Brake Caliper Installation
7. Install disc brake caliper assembly on steering knuckle. Caliper is installed by first sliding top of caliper under top abutment on steering knuckle.
Then installing bottom of caliper against bottom abutment of steering knuckle.
8. Install caliper assembly to steering knuckle attaching bolts. Torque caliper assembly attaching bolts to 31 Nm (23 ft. lbs.).
9. Clean all foreign matter from the threads of the outer C/V joint stub axle. Install hub nut onto threads of stub axle and tighten nut.
