Neon L4-2.0L VIN C (1998)
Hub/Bearing Retaining Nut
6. Remove rear hub and bearing assembly retaining nut. Then remove the hub and bearing assembly from knuckle.
7. If vehicle is equipped with rear drum brakes remove the 4 bolts attaching rear brake support plate to knuckle. Then remove brake support plate,
brake shoes and wheel cylinder as an assembly from rear knuckle. It is not necessary to remove brake flex hose from wheel cylinder when
removing support plate. Brake support plate when removed, must be supported in same manner as caliper assembly.
8. On vehicles equipped with rear disc brakes, remove the 4 bolts attaching disc brake adapter to rear knuckle. Then remove the adapter, rotor shield,
park brake shoes and park brake cable as an assembly from knuckle.
CAUTION: The knuckle to strut assembly attaching bolts are serrated and must not be turned during removal. Loosen and remove nuts while
holding bolts stationary in knuckle.
