Neon L4-2.0L VIN C (1998)
5. Support the brake caliper assembly using a wire hook, not by the hydraulic flex hose.
Remove/Install Rotor
6. Remove the braking disc from the front hub.
7. Install a lug nut on wheel stud to be removed from hub and bearing assembly, so threads on stud are even with end of lug nut. Rotate hub so stud
requiring removal is aligned with notch cast into front of steering knuckle. Install Remover, Special Tool C-4150, or equivalent on hub and
bearing assembly flange and wheel stud.
8. Tighten down on special tool, pushing wheel stud out of the hub and bearing assembly flange. When shoulder of wheel stud is past flange remove
special tool from hub and bearing assembly. Remove lug nut from stud and remove wheel stud from flange.