Neon L4-2.0L VIN C (1998)
Shift Cable: Service and Repair
NOTE: Use this procedure if either of the shift cables require replacement.
REMOVAL
1. Disconnect Power Distribution Center from battery tray and set aside.
2. Remove air cleaner inlet horn.
3. Remove battery and battery tray.
Selector Cable Removal
Crossover Cable Removal
4. Disconnect gear shift cable ends from transaxle shift levers.
CAUTION: Pry up with equal force on both sides of shifter cable isolator bushings to avoid damaging cable isolator bushings.
5. Remove cable to bracket retaining clips at transaxle.
CAUTION: It is recommended that new cable retaining clips be used for reinstallation.
6. Pull cables up out of transaxle bracket.
7. Remove console from vehicle.
