Neon L4-2.0L VIN F HO (2003)
Crankshaft Main Bearing: Specifications
Torque Specifications
1. Install main bearing bedplate to engine block bolts 11, 17 and 20 finger tight. Tighten these bolts down together until the bedplate contacts the
cylinder block.
2. Tighten bolts 1 - 10 to 81 Nm (60 ft. lbs.).
3. Tighten bolts 11 - 20, with baffle studs in positions 12, 13 and 16, to 34 Nm (25 ft. lbs.).
