Neon R/T L4-2.0L VIN F HO (2001)
Front Door Panel: Service and Repair
Trim Panel
TRIM PANEL
REMOVAL
1. Release door latch and open door.
2. Lower door glass.
Fig. 12
3. Remove window regulator crank, if so equipped (Fig. 12).
Fig. 10
4. Remove screw from inside arm rest pull cup (Fig. 10).
5. Remove screw from behind inside latch release handle.
6. Disengage push-in fasteners attaching trim to door panel around perimeter of trim panel.
7. Tilt trim panel outward to clear locator pins on backside of trim panel.
8. Disconnect trim panel from retainer channel in inner belt weatherstrip at top of door by lifting while gently jiggling.
9. Move trim panel away from door and disengage clip attaching latch rod to handle.
