Neon R/T L4-2.0L VIN F HO (2001)
Front Door Panel: Service and Repair
Waterdam
WATERDAM
REMOVAL
1. Remove door trim panel.
2. Remove door speaker, if equipped.
3. Remove door trim pull cup mount bracket.
4. Disconnect clip attaching lock linkage to lock button bell-crank.
Fig. 11
5. Peel water dam away from adhesive around perimeter of inner door panel (Fig. 11).
INSTALLATION
1. Insure that enough adhesive remains to securely retain the water dam. Replace as necessary.
2. Place the water dam into position and press securely to adhesive making sure to properly route wiring and linkages.
3. Engage clip attaching lock linkage to lock button bell-crank.
4. Install door trim pull cup mount bracket.
5. Install door speaker, if equipped.
6. Install door trim panel.