dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Trim Panel > < Rear Shelf|Service and Repair
Page 1
background image

Sun Visor: Service and Repair

SUN VISOR

REMOVAL

All vehicles with driver and passenger side airbags must have a colored coded five Bullet point airbag warning label applied to the sun visor, verify label
availability and ensure the label is installed.

1. Remove sun visor from center support.
2. Remove screws attaching sun visor to roof header.
3. Remove sun visor from header.
4. If equipped, disconnect wire connector from body harness.
5. Remove sun visor from vehicle.

INSTALLATION

All vehicles with driver and passenger side airbags must have a colored coded five Bullet point airbag warning label applied to the sun visor, verify label
availability and ensure the label is installed.

1. Place sun visor in position.
2. If equipped, connect wire connector from body harness.
3. Install screws attaching sun visor to header.
4. Install sun visor into center support.

Trim Panel > < Rear Shelf|Service and Repair