Neon R/T L4-2.0L VIN F HO (2001)
11. Remove the leading and trailing brake shoes, upper return spring and automatic adjuster screw from the brake support plate as an assembly.
12. Disassemble the shoes completely once on the bench.
13. Repeat the above procedure to the rear brakes on the other side of the vehicle.
INSTALLATION - DRUM BRAKE SHOES (REAR)
NOTE: Before proceeding with this procedure, Refer to Service Precautions.
1. Begin on one side of the vehicle.
2. Lubricate the eight shoe contact areas on the support plate and anchor using Mopar Multi-Purpose Lubricant or equivalent.
3. Assemble the front and rear brake shoe assembly, automatic adjuster screw, and upper return spring before installation on the vehicle.
4. Install the pre-assembled brake shoes, automatic adjuster screw and upper return spring on the brake support plate .
5. Install the wave washer on the pin of park brake lever.
