Neon R/T L4-2.0L VIN F HO (2001)
Heater Hose: Service and Repair
Heater Inlet Hose Replacement
REMOVAL
CAUTION: When removing hoses from heater core inlet or outlet nipples DO NOT exert excess pressure. The heater core may become damaged
and leak engine coolant.
NOTE: Review Cooling System Precautions before proceeding with this operation.
1. Drain engine cooling system. Refer to: "Cooling System : Service and Repair" See: Service and Repair
Fig.23 Heater Hoses And Clamps
2. Using spring tension clamp pliers, remove clamps at end of heater hose to be removed.
3. Carefully rotate hose back and forth while pulling away from connector nipple.
INSTALLATION
CAUTION: When removing hoses from heater core inlet or outlet nipples DO NOT exert excess pressure. The heater core may become damaged
and leak engine coolant.
NOTE: Review Cooling System Precautions before proceeding with this operation.
1. Using spring tension clamp pliers, install the hose ends into position.
2. Refill the cooling system. Refer to: "Cooling System : Service and Repair" See: Service and Repair